Avaya 580 - Manual (Page 566)

19-22 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 19
4. Click:
— Add to add this zone filter to the selected interface.
— DELETE to remove this zone filter from the selected interface.
— CANCEL to restore previous settings.
CLI Commands To add interfaces to a zone filter using the CLI, enter the following
command from Interface mode:
(config-if:)# appletalk access-list
list-number> {permit | deny} zone
To delete interfaces to an zone filter, enter the following command from
Interface mode:
(config-if:)# no appletalk access-list
{permit | deny} zone
Viewing AppleTalk Statistics
This section includes:
■
Viewing AppleTalk Global Statistics
■
Viewing the AppleTalk Interface Statistics Table
■
Viewing the AppleTalk Route Table
■
Viewing AppleTalk Route Table Statistics
■
Viewing the AppleTalk ARP Cache Table
■
Viewing the AppleTalk Zone Table
■
Viewing AppleTalk Zone Table Statistics
■
Viewing the AppleTalk NBP Table