Avaya 580 - Manual (Page 693)

Document No. 10-300077, Issue 2 25-19
80-Series QoS
Setting a Physical Port to Use DiffServ
CLI Command Use the set port use-diffserv command to set a port to classify bridged IP
traffic by its DiffServ code point (DSCP). The syntax for the command is:
( configure)# set port use-diffserv {{ |
range>} [..., { | }] | all-ports} {on | off}
Example To set ports 4 through 12 on the module in slot 6 to classify bridged IP
traffic by DSCP, enter:
set port use-diffserv 6/4-12 on
Table 25-10. Keywords, Arguments, and Options
Keyword, Argument or
Option Definition
The slot number of a module. If you specify
, all ports on the module are set
to use DiffServ.
The slot number of a module, and, either a
port number, or a range of port numbers
having the format Px-Py. For example:
• To specify port 1 on the module in slot
3, enter 3/1.
• To specify ports 1 through 5 on the
module in slot 3, enter 3/1-5.
If you specify , the port
or range of ports on the module that you
specify is set to use DiffServ.
{all-ports} All ports in the chassis. If you enter all-ports,
all ports in the chassis are set to use DiffServ.
{on | off} Indicates whether the switch uses the DSCP
to classify bridged IP traffic on the ports that
you specify:
• Enter on to classify traffic by DSCP.
• Enter off to ignore the DSCP.
The default setting is off.