Avaya 580 - Manual (Page 692)

25-18 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 25
Displaying the Priority of a MAC Address
CLI Command Use the show aft entry command to display the priority of a source MAC
address or destination MAC address. The syntax of the command is:
> show aft entry [mac ] [VLAN { |
name }] [port-binding {cpu | filter | forward [spec>]}] [status {learned | management | self | multicast}]
• Associate MAC address
00:00:00:00:00:55 with port 1 on the
module in slot 3 and with VLAN 50.
• Forward frames that have a source or
destination MAC address of
00:00:00:00:00:55.
• Assign a priority of 7 to packets that
have a destination MAC address of
00:00:00:00:00:55.
set aft entry 00:00:00:00:00:55
VLAN 50 port-binding forward 3/1
da-priority aft 7
• Associate MAC address
00:00:00:00:00:55 with port 1 on the
module in slot 3 and with VLAN 50.
• Forward frames that have a source or
destination MAC address of
00:00:00:00:00:55.
• Associate a priority of 5 with the
destination MAC of address
0:00:00:00:00:55.
• Assign the higher of the port priority,
tag priority, or destination MAC
address priority (5) to frames that
have a destination MAC address of
00:00:00:00:00:55.
set aft entry 00:00:00:00:00:55
VLAN 50 port-binding forward 3/1
da-priority max-port-aft 5
Table 25-9. Examples: set aft entry
To... Enter...
2 of 2