Avaya 580 - Manual (Page 497)

Document No. 10-300077, Issue 2 16-3
Configuring IPX Routing
Configuring the Avaya Switch as an IPX Router
You can configure the Avaya P580 or P882 Multiservice switch as an IPX
router. Specific hardware is required to accomplish this configuration.
This section contains the following information and procedures:
■
Hardware Requirements
■
Configuring IPX Routing Globally
■
Configuring IPX Interfaces
■
Creating IPX Static Routes
■
Deleting IPX Static Routes
■
Modifying IPX Static Routes
■ Creating IPX Static Services
■
Deleting IPX Static Service
■
Modifying IPX Static Service
Packet Type Indicates the type of service required or offered by the
packet. Types include:
• Sequenced Packet Exchange (SPX packet)
• NetWare Core Protocol (NCP packet)
• NetBIOS (propagated packet)
Destination
Network The IPX network address of the destination network.
Destination Node The MAC address of the destination node.
Destination Socket Address of the process running in the destination node.
Sockets route packets to different processes within the
same node.
Source Network The network address of the source network.
Source Node The MAC address of the source node.
Source Socket Address of the process running in the source node.
Table 16-1. IPX Datagram Structure Fields
Field Definition
2 of 2