Avaya 580 - Manual (Page 508)

16-14 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 16
4. Click APPLY to save your changes, or CANCEL to restore previous
settings.
5. To view or modify IPX Static Services, expand the Routing > IPX >
Configuration folders in the navigation pane, and then click Static
Services.
The IPX Static Services Web page is displayed in the content pane. See
Figure 16-11 .
Table 16-5. IPX Static Service Web Page Parameters
Parameter Allows you to...
Service Name Enter the IPX Static Service name. For example,
FS_ENG01. Use SLIST (NetWare 3.x) or NLIST (NetWare
4.x) to list your current server names and types from your
NetWare server. You may want to explicitly add a service so
that clients always use the services of a particular server.
Type Enter the service type (in hex) that identifies the type of
IPX static service the server provides. Well-known service
types include:
• Unknown (0)
• Print Queue (3)
• File Server (4)
• Job Server (5)
• Print Server (7)
• Archive Server (9)
• Remote Bridge Server (24)
• Advertising Print Server (47)
Network Enter the IPX Static Service network number (in Hex).
Node Enter the IPX Static Service node address (in hex).
The format of the node value is aa:bb:cc:dd:ee:ff.
Socket Enter the number (in hex) associated with a running process
on the end node (for example, RIP, NLSP).
Next-Hop Node Enter the MAC address of the next destination through
which the service is reached.
The format of the node value is aa:bb:cc:dd:ee:ff.
Interface Enter the interface that corresponds to the next-hop node.
Hops Enter the number of routers (hops) that the packet must pass
through before reaching the network number associated
with the service.