Hardware requirements, Configuring ipx routing globally, Web agent procedure – Avaya 580 User Manual
Page 498
16-4
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 16
Hardware Requirements
To configure your switch as an IPX router, your Avaya P580 or P882
Multiservice switch must be configured with the following hardware:
■
Layer 3 50-series media modules.
■
80-Series Supervisor Modules
■
80-Series Licensed Layer 3 media modules
Configuring IPX Routing Globally
You can configure IPX routing globally using the Web Agent or the CLI.
Web Agent
Procedure
To Enable or Disable IPX routing globally using the Web Agent:
1. In the navigation pane, expand the Routing > IPX > Configuration
folders and then click Global Configuration.
The IPX Global Configuration Web page is displayed in the content
pane. See
.
Figure 16-2. IPX Global Configuration Web Page
2. Configure IPX Routing Global Configuration Web page parameters to
make your switch an IPX router. See
for an explanation of
the Web page parameters.
3. Click APPLY to save your changes, or CANCEL to restore previous
settings.