Web agent procedure – Avaya 580 User Manual
Page 381
Document No. 10-300077, Issue 2
12-53
Configuring IP Routing
Web Agent
Procedure
To display the IGMP Interface Statistics using the Web Agent:
1. In the navigation pane, expand the Routing > IGMP folders, and then
click Interface Statistics.
The IGMP Interface Statistics Web page is displayed in the content
pane. See
.
Figure 12-25. IGMP Interface Statistics Web Page
2. To modify the interface statistics, perform one of the following:
—
Select one or more interfaces, and then click CLEAR to reset
statistics on those interfaces to zero.
—
Click CLEAR ALL to reset all statistics to zero.
—
Click REFRESH to view the latest interface statistics.
for an explanation of the IGMP Interface Statistics Web
page parameters:
Table 12-16. IGMP Interface Statistics Web Page Parameters
Parameter
Defines the...
IGMP Interface
IP interface for these statistics.
IP Address
IP address associated with the interface.
IP Address Mask
Subnet mask associated with each listed interface.
State
Current state of the interface. For example, if the
interface is enabled and operating properly, UP is
displayed.
IGMP Version
Version of IGMP enabled on each interface.The default
version is V2
1 of 2