Avaya 580 - Manual (Page 633)

Document No. 10-300077, Issue 2 21-19
Monitoring the Avaya Multiservice Switch
Setting a Utilization Threshold
To set a utilization threshold, enter Global Configuration mode and use the
following command:
set utilization high-threshold {cpu | FIRE | FORE}
The default setting for the utilization threshold is 95 percent.
Clearing the utilization threshold resets it to 95 percent, its default setting.
To clear the utilization threshold, enter Global Configuration mode and use
the following command:
clear utilization high-threshold {cpu | FIRE | FORE} percent>
Table 21-9. Keywords, Arguments, and Options
Keyword, Argument or
Option Definition
cpu Sets the high threshold for CPU utilization.
100% CPU utilization is the total capacity of
the supervisor module to forward slow path
traffic. When 100% utilization is reached, the
performance of the switch may degrade.
FIRE Sets the high threshold for utilization of the
forwarding engines on 80-series media
modules.
100% FIRE utilization is the total capacity of
the forwarding engines on 80-series media
modules to forward in band traffic. When
100% utilization is reached, the performance
of the switch may degrade.
FORE Sets the high threshold for utilization of the
forwarding engine on the supervisor module.
100% FORE utilization is the total capacity of
the supervisor module to forward out-of-band
traffic. When 100% utilization is reached, the
performance of the switch may degrade.
The high threshold at which you want the
switch to log an event in the event log. Enter a
value from 50 through 99. The default setting
is 95.