Avaya 580 - Manual (Page 513)

Document No. 10-300077, Issue 2 16-19
Configuring IPX Routing
Figure 16-13. IPX Route Table Search Web Page
2. Select the SEARCH Criteria you want to use to find information on
specific routes. For example, if you want to find all static routes that are
presently configured on your switch, search by source and specify static
as your search value.
3. See Table 16-7 to determine the search parameters:
4. Click on the Search button to start:
— If the available routes are found they are displayed in the IPX
Route Table Web page.
— If no routes are available, a message is displayed in the IPX
Route Table Web page.
Table 16-7. IPX Route Table Search Parameters
Parameter Allows you to...
Source Search the IPX route table using of the following
parameters:
• RIP - RIP routing updates
• Static - User configuration
• Local - Directly connected routes
Once you select a parameter, you can search to find the
routes associated with that parameter.
Interface Search the IPX Route table using the interface associated
with the next-hop to the IPX network.
Network Number Search the IPX Route table using the IPX Network
address (hexadecimal number) you specify.