Avaya 580 - Manual (Page 352)

12-24 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 12
Creating a BOOTP/DHCP Server Entry
The BOOTP/DHCP Server Entry allows you to configure a Router as a
BOOTP/DHCP Relay Agent between a BOOTP/DHCP server and the
requesting client.
You can create a BOOTP/DHCP Server entry using either the Web Agent or
the CLI.
* Note: BootP/DHCP must first be enabled in the IP Global
Configuration.
Web Agent
Procedure To create a BOOTP/DHCP entry using the Web Agent:
1. In the navigation pane, expand the Routing > IP > Configuration
folders, and then click BOOTP/DHCP Servers. The IP BOOTP/DHCP
Servers Web page is displayed in the content pane. See
Figure 12-10 .
Figure 12-10. IP BOOTP/DHCP Server Web Page
2. Select CREATE. The Add BOOTP/DHCP Server Entry Web page is
displayed. See Figure 12-11 .
Figure 12-11. Add BOOTP/DHCP Server Entry Web Page
3. Enter the BOOTP/DHCP server IP address in the IP Address field.
4. Click CREATE to save your changes, or CANCEL to restore previous
settings.
* Note: It is possible to create multiple BOOTP/DHCP Server Entries if
necessary.