Cli command, Viewing the lgmp server statistics per vlan, Web agent procedure – Avaya 580 User Manual
Page 604: Viewing the lgmp server statistics per vlan -26
20-26
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 20
CLI Command
To view LGMP server statistics, use the following CLI command:
>
show lgmp server statistics
Viewing the LGMP Server Statistics per VLAN
You can view the LGMP server statistics per VLAN using either the Web
Agent or the CLI.
Web Agent
Procedure
To modify the LGMP server display per VLAN using the Web Agent:
1. In the navigation pane, expand the L2 Switching > Intelligent
Multicast folders, and then click LGMP Server.
The LGMP Server Configuration Web page is displayed in the content
pane.
* Note: You must enable intelligent multicasting on a global basis to
activate your LGMP server per VLAN configuration
2. Select the number from the LGMP Servers column. The LGMP Server
Display per VLAN Web page is displayed in the content pane. See
3. See
to configure the LGMP Server Display per VLAN.
Figure 20-13. LGMP Server per VLAN Web Page
4. Click:
—
CLEAR to reset selected row information.
—
CLEAR ALL to reset all statistics.
—
REFRESH to view the latest information.