Avaya 580 - Manual (Page 612)

20-34 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 20
CLI Command To enable CGMP snooping using the CLI, enter the following command
from Configure mode:
(configure)# set cgmp enable
Table 20-13. CGMP Snooping Web Page Parameters
Parameter Definition
Enable State Select to enable or disable CGMP snooping.
CGMP Packet
Reception
Statistics • Join Messages Received - Displays the number of
CGMP join messages received.
• Leave Messages Received - Displays the number of
CGMP leave messages received.
• Unknown Messages Received - Displays the number of
unknown CGMP messages received.
Intelligent
Multicast
Session
Statistics • New Sessions Created - Displays the number of new
multicast sessions created by CGMP snooping.
• New Client Ports Added - Displays the number of new
client ports added to a multicast session.
• Existing Sessions Removed - Displays the number of
existing multicast sessions that have been removed by
CGMP snooping.
• All Sessions Removed - Displays the number of times
that all multicast sessions created by CGMP snooping
were removed.
• New Router Ports Added - Displays the number of
new router ports added by CGMP snooping.
• Existing Router Ports Removed - Displays the number
of router ports that were created by the CGMP snooper
and were removed.