Avaya 580 User Manual
Page 52
2-4
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 2
* Note: Avaya strongly recommends that you change the default
password.
d. Enter the IP address for the switch manager’s Ethernet console.
e. Enter the subnet mask.
f. Enter the default gateway for the switch.
The following is a sample output of the Setup command to change or
modify the Supervisor’s Ethernet Console’s IP address, subnet mask,
default gateway or changing the super user password.
Welcome to Switch Setup. The brief series of
questions that follows will help you to configure
this switch. After completing this process, you
will be able to manage the switch using:
- the switch-based HTTP server
- the Element Management System.
Text in [] is the default answer for each
questions.
To accept the default, press ENTER.
Would you like to change the super user password
[Yes]? Y
Old Password: xxxx
New Password: xxxx
Re-type New Password: xxxx
User password changed successfully
What do you want the switch manager’s console
Ethernet IP Address to be [0.0.0.0]? 10.0.0.1
What is the subnet mask for your network’s
IP address [0.0.0.0]? 255.255.255.0
What is the IP address of the default gateway for
this network segment [0.0.0.0]?