Cli command, Deleting ipx static service, Web agent procedure – Avaya 580 User Manual
Page 509: Modifying ipx static service
Document No. 10-300077, Issue 2
16-15
Configuring IPX Routing
Figure 16-11. IPX Static Services Web Page
CLI Command
To create IPX static services using the CLI, enter the following command in
Configure mode:
(configure)#
ipx service
Deleting IPX Static Service
You can delete an IPX static service using either the Web Agent or the CLI.
Web Agent
Procedure
To delete an IPX static service using the Web Agent:
1. In the navigation pane, expand the Routing > IPX > Configuration
folders, and then click Static Services.
The IPX Static Services Web page is displayed in the content pane. See
.
2. Select the checkbox for the IPX Static Service that you want to remove.
3. Click DELETE to remove the IPX static service, or CANCEL to keep
the IPX Static Service.
CLI Command
To delete an IPX static service using the CLI, enter the following command
in Configuration mode:
(configure)#
clear ipx service {
Modifying IPX Static Service
You can modify an IPX static service using either the Web Agent or the
CLI.
Web Agent
Procedure
To modify an IPX static service using the Web Agent:
1. In the navigation pane, expand the Routing > IPX > Configuration
folders, and then click Static Services.
The IPX Static Services Web page is displayed in the content pane. See
.