Avaya 580 - Manual (Page 275)

Document No. 10-300077, Issue 2 8-53
Configuring Ports
To globally disable IEDR for all ports in hunt groups, enter:
set huntgroup internal-error-shutdown disable
Setting the IEDR Threshold for Internal Errors
You can set the threshold at which the switch will shutdown a port. By
default this threshold is set to 10 internal errors in a 5-second time period.
You can set the threshold to any number between 5 and 500 internal errors
in a 5-second time period. This setting is global for all ports that have been
enabled for IEDR including ports configured for hunt groups.
To set the IEDR threshold:
1. Enter Global Configuration mode.
The CLI displays the (configure)# prompt.
2. Enter the following command:
set internal-error-threshold
Viewing IEDR Settings
To view a list of the ports that have IEDR enabled:
1. Enter Global Configuration mode.
The CLI displays the (configure)# prompt.
2. Enter the following command:
show port internal-error-config
Viewing IEDR Settings for Hunt Groups
To view the global IEDR setting for hunt groups:
1. Enter Global Configuration mode.
The CLI displays the (configure)# prompt.
2. Enter the following command:
show huntgroup internal-error-config