Avaya 580 - Manual (Page 300)

9-22 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 9
Web Agent
Procedure To use the Web Agent to change the status of option 82:
1. Open the IP Global Configuration Web page.
For information on how to open this Web page, see “ Enabling IP
Routing Global Parameters ” in Chapter 12 , “ Configuring IP Routing .”
2. Enable or disable the suboptions as appropriate in the DHCP Option -
Circuit Info and DHCP Option 82 - Agent Info fields.
CLI Commands To use the CLI to change the status of option 82, enter Global Configuration
mode and use the following commands:
■
To enable suboption 1, use the following command:
(configure)# ip dhcp circuit-info
■
To enable suboption 2, use the following command:
(configure)# ip dhcp agent-info
■
To disable suboption 1, use the following command:
(configure)# no ip dhcp circuit-info
■
To disable suboption 2, use the following command:
(configure)# no ip dhcp agent-info