Removing a fabric mode 2 port mirror, Web agent procedure, Cli command – Avaya 580 User Manual
Page 666
23-18
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 23
Removing a Fabric Mode 2 Port Mirror
Web Agent
Procedure
To remove a port mirror on a switch in Fabric mode 2 by using the Web
Agent:
1. In the navigation pane, expand the Modules & Ports folder, and then
click Port Mirroring.
The Port Mirroring Information page is displayed in the content pane.
2. In the Source Port column, select None for the port mirror that you want
to remove.
3. Click Apply.
CLI Command
To remove a port mirror from a switch in Fabric mode 2, use the following
CLI command from configure mode:
(configure)#
clear port mirror Fabric_mode2 channel
Viewing Information about a Fabric Mode 2 Port Mirror
Web Agent
Procedure
To view information about a Fabric mode 2 port mirror:
1. In the navigation pane, expand the Modules & Ports folder, and then
click Port Mirroring.
The Port Mirroring Information page is displayed in the content pane.
This page displays information about all port mirrors that are setup.
CLI Command
To view information about a Fabric mode 2 port mirror, use the following
CLI command:
(configure)#
show port mirror Fabric_mode2
This command displays the source ports, mirror port, direction being
mirrored, sampler type, and maximum packet per second for all port mirrors
that are currently set up.