Avaya 580 - Manual (Page 91)

Document No. 10-300077, Issue 2 2-43
Setting Up the Switch
— File — To copy a file stored on the switch to your running or
startup configuration, to a location on the switch, or to a location
on a TFTP server.
— TFTP Server — To copy a file stored on a TFTP server to your
running or startup configuration or to a file on the switch.
*Note: If you select File or TFTP Server, you must also provide
the path and filename of the source file in the Destination
Filename field.
3. Select one of the following from the Copy Destination
pull-down menu.
— Running-Config — Copies your startup configuration, or other
file located on the switch or on a TFTP server, to your running
configuration.
— Startup-Config — Copies your running configuration, or other
file located on the switch or on a TFTP server, to your startup
configuration.
— File — Copies your startup or running configuration, another
file located on the switch, or a file located on a TFTP server to a
file on the switch.
Copy Destination Specifies the location of the
destination • Unspecified- Specifies an initialized value.
• File - Specifies that a source is copied or
downloaded to NVRAM.
• Running-Config - Specifies that a source is
copied to the running configuration.
• Startup-Config - Specifies that a source is
copied to the startup configuration.
• TFTP Server - Specifies that a source is
copied to a TFTP server location.
Destination Filename Specifies the path and name of
the destination file Configuration files and other files can be copied
to NVRAM on the switch or to a TFTP server as
a destination location.
TFTP Server IP Address Specifies the IP address of a
source or destination TFTP
server Copy (download) source files, located on a
TFTP server, to your running configuration,
your startup configuration, or a location on the
switch. Or, copy (upload) your configuration
files, or a file located on the switch, to a TFTP
server.
Table 2-6. Configuration File Management Web Page Parameters
Parameter Description Options
2 of 2