Avaya 580 - Manual (Page 556)

19-12 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 19
CLI Command To create an AppleTalk static route using the CLI, enter the following
command in Interface mode:
(config-if:)# appletalk static cable-range
to [floating] zone
Editing AppleTalk Static Routes
You can edit AppleTalk Static routes using either the Web Agent or the CLI.
Web Agent
Procedure To edit an AppleTalk static route using the Web Agent:
1. In the navigation pane, expand the Routing > AppleTalk >
Configuration folders, and then click Static Route.
The AppleTalk Static Route Web page is displayed in the content pane.
See
Figure 19-6 .
Figure 19-9. AppleTalk Static Routes
2. If you need to Add or Delete Zones, select Edit Zone otherwise, skip to
step 4. The Edit AppleTalk Zone Web page is displayed. See Figure 19-
10
Figure 19-10. Edit AppleTalk Zone