Displaying ospf links, Web agent procedure, Cli commands – Avaya 580 User Manual
Page 483: Displaying ospf links -21
Document No. 10-300077, Issue 2
15-21
Configuring the OSPF Routing Protocol
Displaying OSPF Links
The OSPF link display provides information on the currently active OSPF
links. You can display the OSPF using either the Web Agent or the CLI.
Web Agent
Procedure
To display OSPF links using the Web Agent:
1. In the navigation pane, expand the Routing > IP > OSPF folders, and
then click Links.
The OSPF Links Web page is displayed in the content pane. See
Figure 15-10. OSPF Links Web Page
2. See
for an explanation of the OSPF Links Web page
parameters:
CLI Commands
To display OSPF links using the CLI, enter the following command:
■
>
show ip ospf interface
■
>
show ip ospf virtual-links
Table 15-7. OSPF Link Parameters
Parameter
Displays the...
State
State of the OSPF link.
IP Address
IP address of the OSPF link.
Area ID
Area ID (IP address) associated with the OSPF link.
Type
Type of OSPF link.
DR Router ID
Router ID of the designated router.
DR Address
IP address of the designated router.
BDR Address
IP address of the designated border router.