beautypg.com

Password recovery, Syntax, Description – Avaya 580 User Manual

Page 738

background image

Appendix B

B-2

User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1

Accessing BOOT Mode with Corrupted Operational Images

The Avaya P580 and P882 Multiservice switch will automatically come up
in BOOT mode if both operational images are corrupted.

You will see the following output on your console:

Starting the boot system, please wait.

Initializing the event subsystem ... done

Initializing the platform ... done

Starting up threads ...

Periodic Task

Network Interface

Front Panel Display

Download

Command Line Parser

Boot process complete - system is now operational.

Boot Software Revision: V5.3

Press Ctrl-P for previous command, Ctrl-N for next command

download Download to FEPROM

feprom Flash EPROM configuration

initLogins Restore default passwords

ip IP Configuration

manuf Get/Set MAC address

nvram Initializes NV RAM-diags run upon reboot

peek Read from memory

ping Ping host [tries] [delay]

poke Write to memory

reset Reset System

Boot>

Password Recovery

The following command is used to reset the switch to the factory default
passwords.

initLogins

Syntax

Boot> initLogins set <0=no change, 1=factory default>

Description

Using a value of zero will retain the current passwords in NVRAM upon
resetting the switch. Using a value of one will restore the factory default
passwords in NVRAM upon resetting the switch.

This manual is related to the following products: