Cli command, Table 20-1 – Avaya 580 User Manual
Page 585
Document No. 10-300077, Issue 2
20-7
Managing Intelligent Multicasting
CLI Command
To configure intelligent multicasting globally using the CLI, enter the
following command from Configure mode:
(configure)#
set intelligent-multicast {enable}
Table 20-1. Intelligent Global Multicast Configuration Web Page
Parameters
Parameter
Definition
Enable State
Select Disable to prevent intelligent multicasting
globally. The default value is Enabled.
Automatic Router Port
Pruning
Select:
• Disable - to prevent automatic router port pruning.
The default value is Enable.
• Time - Enter the time, in seconds, after which quiet
learned router ports can be pruned. The valid range
(in seconds) is 10 to 172800 (48 hours). The default
value is 120 seconds.
Automatic Session
Pruning
Select:
• Disable - To prevent automatic removal of stale
sessions. The default value is Enable.
• Time - Enter the time, in seconds, after which stale
learned sessions can be removed. The valid range
(in seconds) is 10 to 172800 (48 hours). The default
value is 250 seconds.
Automatic Client Port
Pruning
Select:
• Disable - to prevent the automatic removal of quiet
learned client ports from a session. The default
value is Disable.
• Time - Enter the time, in minutes, after which quiet
learned client ports can be automatically removed
from a session. The valid range (in minutes) is 1 to
1440 (24 hours). The default value is 60 minutes.