Avaya 580 - Manual (Page 687)

Document No. 10-300077, Issue 2 25-13
80-Series QoS
Setting the Priority of a Physical Port
CLI Command Use the set port default-priority command to set the priority of a physical
port. Each physical port has a default priority of 3. The syntax of the
command is:
(configure)# set port default-priority {{ |
swport-range>} [..., { | }] | all-ports}
48-port 10/100 modules • 1 set of 8 queues for
ports 1–12.
• 1 set of 8 queues for
ports 13–24.
• 1 set of 8 queues for
ports 25–36
• 1 set of 8 queues for
ports 37–48
Total: 4 sets of 8
queues
1 set of 8 queues per
port.
Total: 48 sets of 8
queues.
Table 25-3. Modules and Available Queues
Module Ingress Queues Egress Queues
2 of 2
Table 25-4. Keywords, Arguments, and Options
Keyword, Argument or
Option Definition
The slot number of a module. If you specify
, the priority is set for all ports on
the module.
The slot number of a module, and, either a
port number, or a range of port numbers
having the format Px-Py. For example:
• To specify port 1 on the module in slot
3, enter 3/1.
• To specify ports 1 through 5 on the
module in slot 3, enter 3/1-5.
If you specify , the
priority is set for the port or range of ports on
the module that you specify.
1 of 2