Avaya 580 User Manual
Page 602
20-24
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 20
Table 20-9. LGMP Server Configuration Web Page Parameters
Parameter
Definition
Enable State
Select to enable or disable LGMP server configuration.
The default value is Disabled.
Proxy Mode
Select to enable or disable Proxy mode. Proxy mode
allows the server to send LGMP router report and leave
messages on behalf of neighbor routers on the same
VLAN.
Server ID Priority
The priority of the LGMP server on this switch. The
server ID priority and the IP address associated with the
VLAN determine whether the LGMP server wins LGMP
distribution election. The lower the number the more
likely it will win the election. The valid range is 0 to 255.
The default value is 128.
Router Report Time
The time interval (in seconds) between router reports sent
by the LGMP server in distributor state. The valid range
is 10 to 10,000. The default value is 125 seconds.
Robustness
Variable
The scalar value used by non-distributor LGMP servers
when timing out the LGMP server in the distributor state.
The valid range is 2 to 10. The default value is 2.
LGMP Servers
Displays the number of LGMP servers and opens the
LGMP Server Display per VLAN Web page.
Note: Only VLANs that have an active IGMP
interface can be LGMP servers.
LGMP Message
Reception Statistics
• Router Report - Displays the number of LGMP
router report messages received.
• Invalid - Displays the number of LGMP messages
received with an invalid payload.
1 of 2