Avaya 580 - Manual (Page 266)

8-44 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 8
3. Complete the following:
■
Name—Enter the pair’s name.
■
Primary Port—Select the pair’s primary port from the pull-down
menu.
■
Secondary Port—Select the pair’s secondary port from the pull-
down menu.
4. Click Apply.
CLI Command To create a port redundancy pair, use the following CLI command:
(configure)# set port-redundancy name
Deleting a Port Redundancy Pair
Web Agent
Procedure You can delete a port redundancy pair from the Port Redundancy
Configuration Web page.
To delete a port redundancy pair:
1. In the navigation pane, expand the L2 Switching folder, and then click
Port Redundancy. The Port Redundancy Configuration Web page is
displayed in the content pane.
2. Select the redundancy pair(s) you want to delete.
3. Click Delete.
The redundancy pair is deleted.
CLI Command To delete a port redundancy pair with the CLI, use the following command
in Configure mode:
(configure)# no port-redundancy