Avaya 580 - Manual (Page 548)

19-4 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 19
Enabling AppleTalk Global Routing
To enable AppleTalk routing globally:
1. In the navigation pane, expand the Routing > AppleTalk >
Configuration folders, and then click Global Configuration.
The AppleTalk Routing Global Configuration Web page is displayed in
the content pane. See
Figure 19-1 .
* Note: AppleTalk Routing is disabled by default.
Figure 19-1. AppleTalk Routing Global Configuration Web Page
2. Select Enable from the AppleTalk Routing pull-down menu.
3. Click APPLY to save your changes, or CANCEL to restore previous
settings.
Creating an AppleTalk Routing Interface
You can create an AppleTalk routing interface using the Web Agent or CLI.
Web Agent
Procedure To create an AppleTalk routing interface using the Web Agent:
1. Enable AppleTalk routing globally. See “ Enabling AppleTalk Global
Routing ” earlier in this chapter.
2. In the navigation pane, expand the Routing > AppleTalk >
Configuration folders, and then click Interfaces.
The AppleTalk Interfaces Web page is displayed in the content pane.
See
Figure 19-2 .
Figure 19-2. AppleTalk Interfaces Web Page