Displaying router ports, Web agent procedure, Displaying router ports -8 – Avaya 580 User Manual
Page 586
20-8
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 20
Displaying Router Ports
You can display router ports using either the Web Agent or the CLI.
Web Agent
Procedure
To display router ports using the Web Agent:
1. In the navigation pane, expand the L2 Switching > Intelligent
Multicast folders, and then click Global Configuration.
The Intelligent Multicast Global Configuration Web page is displayed
in the content pane. See
*Note: You must enable intelligent multicasting on a global basis
to make your router ports active. See “
” earlier in this chapter.
2. Select Display/Configure Router Ports. The Router Port Display/
Configuration Web page is displayed. See
.
Figure 20-3. Router Port Display/Configuration Web Page
3. See
for an explanation of the Router Port Display/
Configuration Web page parameters.
4. Select a router port from the Port column and click DELETE to delete
the port, or CANCEL to restore previous settings.