Avaya 580 - Manual (Page 514)

16-20 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 16
Displaying the IPX Route Table
To display the IPX route table:
1. Perform an IPX Route Table search as described in “ Searching the IPX
Route Table .” If available routes are found they are displayed in the IPX
Route Table Web page.
2. See Table 16-8 to review your configuration:
Displaying IPX Route Table Statistics
To display your IPX route table statistics:
1. In the navigation pane, expand the Routing > IPX > Display folders,
and then click Route Table Statistics.
The IPX Route Table Statistics Web page is displayed in the content
pane. See
Figure 16-14 .
Table 16-8. IPX Route Table Parameters
Parameter Defines the...
Select Parameter selected.
Network Network number (in hex) of the IPX network.
Interface Interface associated with the IPX network.
Source Method by which the network was learned. For example,
RIP, local, or static.
TTL Number of seconds before the route expires.
Ticks Amount of time (in ticks) that the packet takes to reach
the network number you specified. A tick is
approximately 1/18th of a second.
Hops Number of routers (hops) that the packet must pass
through before reaching the network number associated
with the IPX network.
Next-Hop MAC
Address MAC address of the next destination through which the
network is reached.