beautypg.com

Cli command, Displaying the igmp group membership table, Web agent procedure – Avaya 580 User Manual

Page 383: Displaying the igmp group membership table -55

background image

Document No. 10-300077, Issue 2

12-55

Configuring IP Routing

CLI Command

To display the IGMP Interface Statistics using the CLI, enter the following
command from configuration mode:

(configure)#

show ip igmp statistics

Displaying the IGMP Group Membership Table

The multicast group table provides information on interfaces that are
members of an IGMP group and contains an expiry time for the entry, IP
address of the group, and the group reporter address.

Web Agent
Procedure

To display the multicast group table using the Web Agent:

1. In the navigation pane, expand the Routing > IGMP folders, and then

click Group Membership Table.

The IGMP Group Membership Table Web page is displayed in the
content pane. See

Figure 12-26

.

Figure 12-26. IGMP Group Membership Table Web Page

2. To modify the IGMP Group Membership Table, perform one of the

following steps:

Select the entry and click Delete Entry to delete one or more
entries.

Click Flush Table to clear the entire table.

Click REFRESH to receive the most up-to-date information on
the entries in the table.

3. See

Table 12-17

for an definition of the IGMP Group Membership Table

Web page parameters:

This manual is related to the following products: