Avaya 580 - Manual (Page 374)

12-46 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 12
CLI Command To display the global IP routing statistics using the CLI, enter the following
command from the enable mode or configuration mode prompt:
> show ip traffic
Searching the IP Routing Table
To use the IP routing table:
1. In the navigation pane, expand the Routing > IP > Display folders, and
then click Route Table Search.
The IP Route Table Search Web is displayed in the content pane. See
Figure 12-20 .
BOOTP/DHCP In
Responses Total number of BOOTP/DHCP response
datagrams received by the BOOTP/DHCP Relay
Agent.
BOOTP/DHCP In
Discards Number of BOOTP/DHCP requests
discarded.Incremented when an IP interface
receives a DHCP/BootP request, but the IP
interface does not have the BooTP/DHCP Relay
Gateway Enabled.
BOOTP/DHCP In Hops
Exceeds Number of BOOTP/DHCP requests not forwarded
due to number of hops exceeds.
BOOTP/DHCP Out
Requests Total number of BOOTP/DHCP requests
forwarded by the BOOTP/DHCP Relay Agent.
BOOTP/DHCP Out
Responses Total number of BOOTP/DHCP responses
forwarded by the BOOTP/DHCP Relay Agent.
Table 12-11. IP Routing Global Statistics
Statistic Defines the...
6 of 6