Avaya 580 - Manual (Page 23)

Document No. 10-300077, Issue 2 xxiii
Preface
WARNING:
CAUTION:
Notes, Cautions, and Warnings
The following text and icon conventions are used in this guide for Notes,
Cautions, and Warnings.
* Note: Provides additional information about a procedure or topic.
Indicates a condition that may cause bodily injury or death.
Indicates a condition that may damage hardware or software.
Using the Web
Agent. The Web Agent consists of
folders that you must expand
to perform specific operations.
The folders are located in the
navigation pane of the Web
Agent. In the navigation pane,
expand Modules & Ports
folder, and then click
Configuration.
Web Agent vs.
Command Line
Interface (CLI)
steps. The procedures in this guide
provide detailed steps for the
Web Agent. A series of CLI
commands are also available
that accomplish the same
actions. These commands are
listed after the Web Agent
procedure. For more
information about these
commands, see the Command
Reference Guide for the Avaya
P580 and P882 Multiservice
Switches, Software Version
6.1. In the Ports field, select the
port number of the module.
To view switch port settings,
use the following CLI
command: > show port
.
Knowledge level All procedures in this guide
are written with the
assumption that the reader
knows how to navigate a
windows-type environment
(use scroll bars, open pull-
down menus, etc.). Scroll to the “Configuring
IP” section.
Open the In-band IPC pull-
down menu.
Convention Represents Examples
2 of 2