beautypg.com

Cli command, Creating a static multicast session, Web agent procedure – Avaya 580 User Manual

Page 593: Creating a static multicast session -15, Table 20-5

background image

Document No. 10-300077, Issue 2

20-15

Managing Intelligent Multicasting

CLI Command

To delete a multicast session client port using the CLI, enter the following
command from Configure mode:

(configure)#

clear intelligent-multicast client-port

port

Creating a Static Multicast Session

You can create a static multicast session using either the Web Agent or the
CLI.

Web Agent
Procedure

To create a new static multicast session using the Web Agent:

1. In the navigation pane, expand the L2 Switching > Intelligent

Multicast folders, and then click Static Sessions.

The Static Multicast Sessions Web page is displayed in the content
pane. See

Figure 20-7

.

*Note: You must enable intelligent multicasting on a global basis

to make your static multicast session active. See

Configuring Global Intelligent Multicasting

” earlier in

this chapter.

Table 20-5. Multicast Session Client Port Web Page Parameters

Parameter

Definition

Select

Select the multicast session client port.

Port

Displays the client port number.

Application

Displays the application(s) associated with this client port. The
applications are:

• Mgmt

• IGMP

• LGMP

• CGMP

This manual is related to the following products: