beautypg.com

Web agent procedure – Avaya 580 User Manual

Page 78

background image

2-30

User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1

Chapter 2

Web Agent
Procedure

To configure the console serial port as a PPP console from the Web Agent:

1. In the navigation pane, expand the System > Configuration folders, and

then click Console.

The Console Configuration Web page is displayed in the content pane.
See

Figure 2-14

.

2. Select PPP as the console type and click SELECT.

The Console Port Configuration Web page is displayed in the content
pane and displays PPP for the Console Type (

Figure 2-17

).

* Note: If you select PPP, the PPP Console Port Configuration Web

page is displayed.

Figure 2-17. PPP Console Configuration Web Page

3. Select a baud rate from the Baud Rate field pull-down menu that is

different from the one already selected.

4. Select an option from the Flow Control field pull-down menu. The

options are: None and Xon/Xoff.

*Note: You can only change the baud rate and flow control

parameters after you configure the serial port as a PPP
console.

This manual is related to the following products: