Avaya 580 - Manual (Page 417)

Document No. 10-300077, Issue 2 12-89
Configuring IP Routing
Viewing LDAP Statistics
You can view LDAP statistics from either the Web Agent or the CLI.
Web Agent
Procedure To view LDAP statistics using the Web Agent:
1. In the navigation pane, expand the Routing > IP > Display folders, and
then click LDAP Statistics.
The LDAP Statistics Web page is displayed in the content pane. See
Figure 12-42 .
Figure 12-42. LDAP Statistics Web Page
2. Click Refresh to dynamically update LDAP Statistics parameters.
3. See Table 12-35 for an explanation of the LDAP Statistics Web page
parameters:
Table 12-35. LDAP Statistics Web Page Parameters
Parameter Definition
Last Change Displays the sysUpTime since this device was last modified.
You can detect a change in the Policy Capabilities by polling a
single object using this information.
Producer
Signal The sequence number that, when modified, triggers the LDAP
client to download the latest policy from the LDAP server.
Typically, Avaya Policy Manager will set this value whenever
there is a new policy to download. If this value is a non-zero
value, the LDAP client will compare it to the producer signal
on the LDAP server. No comparison is made if the value is
zero.
1 of 2