Avaya 580 - Manual (Page 215)

Document No. 10-300077, Issue 2 7-17
Configuring Rapid Spanning Tree
Configuring a Bridge Port
Web Agent
Procedure To configure a spanning tree bridge port:
1. In the navigation pane, expand the L2 Switching folder.
2. Click Spanning Tree.
The Spanning Tree Information Web page is displayed in the content
pane. See
Figure 7-2 .
3. In the Bridge Ports field, click the bridge for which you want to
configure a port.
The Spanning Tree Per Module Bridge Port Information Web page is
displayed in the content pane.
4. In the Bridge Ports field, click the ports that you want to configure.
The Spanning Tree Bridge Port Information Web page is displayed. See
Figure 7-4 .
5. In the Bridge Port field, click the bridge port that you want to configure.
The Spanning Tree Port Configuration Web page is displayed. See
Figure 7-5 .
Figure 7-5. Spanning Tree Port Configuration Web Page