Avaya 580 User Manual
Page 468
15-6
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 15
Figure 15-3. ADD OSPF Area Web Page
3. See
to configure the Add OSPF Area Web page parameters.
4. Click CREATE to save your changes, or CANCEL to restore previous
settings.
Table 15-2. Add OSPF Area Web Page Parameters
Parameter
Allows you to...
Area ID
Specify the Area ID (32-bit character) for the new area. This
must be a unique ID within AS.
Note:
Do not use 0.0.0.0 as an area ID.
Area Type
Select the type of area. Types include:
• Non-Stub - Non-edge device/router.
• Stub - An edge device/router that does not leak external
advertisements.
• Not-so-stubby - This is still a stub area, however, this
device/router can leak some external advertisements.
Translate 7 into
5
Enable or Disable the translation of the NSSA ASE Type 7
into an AS External LSA Type 5.
Stub Metric
Specify the stub area default summary cost metric. (Default
is 1).
Type 3 ASE
Filter
Select to enable or disable the Type 3 summary LSA filter for
Stub and NSSA only.