Cli command, Adding or deleting interfaces to a zone filter, Web agent procedure – Avaya 580 User Manual
Page 565: Adding or deleting interfaces to a zone filter -21
Document No. 10-300077, Issue 2
19-21
Configuring AppleTalk Routing
—
CANCEL to restore previous settings.
—
Edit If to add or delete this zone filter to/from an interface. The
Add/Delete Interface to Zone Filter Web page is displayed. See
“
Adding or Deleting Interfaces to a Zone Filter
” later in this
chapter for more information.
CLI Command
To edit an AppleTalk zone filter using the CLI, use the following command:
(configure)#
appletalk access-list
deny} zone
Adding or Deleting Interfaces to a Zone Filter
You can add or delete interfaces to a zone filter using either the Web Agent
or the CLI.
Web Agent
Procedure
To add or delete interfaces to a zone filter using the Web Agent:
1. In the navigation pane, expand the Routing > AppleTalk >
Configuration folders, and then click Zone Filter.
The AppleTalk Zone Filter Web page is displayed in the content pane.
See
2. Select Edit If. The Add/Delete Interface to Zone Filter Web page is
displayed. See
.
Figure 19-18. Add/Delete Interface to Zone Filter Web Page
3. Select the interface to be added from the Add field pull-down menu.
Or
Click the checkbox in the Select column for the interface that you want
to be remove.