Avaya 580 - Manual (Page 611)

Document No. 10-300077, Issue 2 20-33
Managing Intelligent Multicasting
Figure 20-16. CGMP Snooping Web Page
Enabling CGMP Snooping
You can enable CGMP Snooping using either the Web Agent or the CLI.
Web Agent
Procedure To enable CGMP snooping using the Web Agent:
1. In the navigation pane, expand the L2 Switching > Intelligent
Multicast folders, and then click CGMP Snooping.
The CGMP Snooping Web page is displayed in the content pane. See
Figure 20-16 .
*Note: You must enable intelligent multicasting on a global basis
to activate CGMP snooping configuration.
2. See Table 20-13 for an explanation of the CGMP Snooping Web page
parameters.
3. Click...
— APPLY to save your changes
— CANCEL to restore previous settings.