Avaya 580 - Manual (Page 69)

Document No. 10-300077, Issue 2 2-21
Setting Up the Switch
8. In the Expiration Warning (weeks) field, enter the number of weeks
before user account expiration that you want the user warned. The
expiration warning can range from 0 to the expiration period. A setting
of 0 indicates that no warning is generated.
9. In the Access Type field, select an access type for the user. The options
are:
— READ_ONLY
— READ_WRITE
— ADMINISTRATOR
— Custom access types—All custom access types that are
configured on the switch are displayed. For information on
custom access types, see “
Configuring Custom Access Types ”
earlier in this chapter.
10. In the Management Type field, select the interfaces from which the
user can manage the switch. The options are:
— Local CLI. User can manage the switch from the serial console
on the supervisor module.
— Remote CLI. User can manage the switch by means of a Telnet
or SSH session.
— Web. User can manage the switch by means of the Web Agent.
11. Click APPLY.
CLI Command To create a user account, use the following CLI commands:
■
To create a user account:
(configure)# username password [encrypted-
type1] [access-type {read-only | read-write | admin |
}] [mgmt-type [all] [local-cli] [remote-cli] [web]]
■
To set an expiration period and expiration warning:
(configure)# username [exp-period ]
[exp-warning ]