Avaya 580 - Manual (Page 591)

Document No. 10-300077, Issue 2 20-13
Managing Intelligent Multicasting
CLI Command To perform a session search using the CLI, enter the following command
from User mode:
> show intelligent-multicast session
Deleting an Intelligent Multicast Session
You can delete an intelligent multicast session using either the Web Agent
or the CLI.
Web Agent
Procedure To delete an intelligent multicast session using the Web Agent:
1. In the navigation pane, expand the L2 Switching > Intelligent
Multicast folders, and then click Session Search.
The Intelligent Multicast Session Search Web page is displayed in the
content pane. See
Figure 20-4 .
2. Select SEARCH to begin the search for the multicast session. The
Multicast Sessions Web page displays with the search results. See
Figure 20-5 .
3. Select the checkbox next to the multicast session that you want to delete
and click DELETE.
*Note: Static (Mgmt) sessions can only be deleted through the
Static Sessions Web page.
CLI Command To delete a multicast session using the CLI, enter the following command
from Configure mode:
(configure)# clear intelligent-multicast session
Client Ports Displays the number of client ports in the multicast session
and opens the Multicast Session Client Ports Web page.
Application Displays the active application(s) that configured the
multicast session. The applications include:
• Mgmt
• IGMP
• LGMP
• CGMP
Table 20-4. Multicast Sessions Web Page Parameters
Parameter Definition
2 of 2