Avaya 580 - Manual (Page 178)

6-12 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 6
4. Click APPLY to save your changes, or CANCEL to restore previous
settings.
Binding Type The binding types are set through the switch ports. See
“
Assigning VLANs to a Port and Associated Issues ” in
Chapter 8 , “ Configuring Ports .”
• Static - when switch ports are added manually and
can be removed
• Persistent - when switch ports are bound to VLANs
automatically but can not be removed. automatically
(i.e., if the binding for a switch port is set to 'Bind to
All').
• Dynamic - when a switch port is assigned to VLAN
using automatic VLAN binding,(i.e. if the binding for
a switch port is set to “Bind to Received”). The
VLAN may be deleted, but if the port VLAN binding
is “Bind to Received”, the VLAN may be re-added
by receiving tagged traffic. This causes the port to
again dynamically bind to the VLAN.
See “ Configuring Switch Ports Settings ” in Chapter 8 ,
“ Configuring Ports ,” for more information.
Frame Format • From Port - causes port to send frames using the
frame format specified in the Trunk Mode attribute of
the corresponding switch port.
• Clear - causes port to send untagged frames on this
port for this VLAN.
Note: See “ VLAN Introduction ” earlier in this chapter.
Table 6-2. VLAN Switch Port Web Page Parameters
Parameter Defines...
2 of 2