Avaya 580 - Manual (Page 539)

Document No. 10-300077, Issue 2 18-9
Configuring the IPX SAP Protocol
Type Specify the service type (in hex) that identifies the type of
service the server provides. Well-known service types
include:
• Unknown (0)
• Print Queue (3)
• File Server (4)
• Job Server (5)
• Print Server (7)
• Archive Server (9)
• Remote Bridge Server (24)
• Advertising Print Server (47)
• NetWare Directory Services (278)
A value of ffff matches all service type values.
Direction Select the direction of the filter in question. Filter choices
include:
• Inbound - Applies the filter only to SAP packets
received on the interface.
• Outbound - Applies the filter only to SAP packets sent
on the interface.
• Both - Applies the filter to SAP packets both sent and
received on the interface
Default value is outbound.
Filter/Suppress Disable whether the services matching Net and Type are
filtered (inbound) or suppressed (outbound).
• Filtered - Applies the filter only to SAP packets
received (inbound direction) on the interface.
• Suppressed - Applies the filter only to SAP packets
sent (outbound direction) on the interface.
Select Disable to disable the filtering and suppression of
traffic. The default is Enable.
Hops Specify the number of routers (hops) that the packet must pass
through before reaching the service(s) matched by the filter.
This entry is used to override the value in the SAP packet.
Entering 0 ensures that there is no override in the transmission
of data on the network.
Table 18-3. Add IPX SAP Network Filter Web Page Parameters
Parameter Allows you to...
2 of 2