Avaya 580 User Manual
Page 504
16-10
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 16
2. To create a new IPX Static Route, click CREATE.
* Note: Only the create button is shown if no IPX Static Routes are
configured.
The Add IPX Static Route Web page is displayed. See
.
Figure 16-7. Add IPX Static Route Web Page
3. See
to configure the IPX Static Route parameters.
Table 16-4. IPX Static Route Parameters
Parameter
Allows you to...
Network
Enter the IPX network number that you want to assign to
the IPX static route.
Next-Hop Node
Enter the MAC address for the next destination to which
the packet is routed. Format of the value to enter is
aa:bb:cc:dd:ee:ff.
Interface
View the IPX Interface associated with the next hop.
Ticks
Enter the amount of time (in ticks) that the packet takes to
reach the network number you specified. A tick is
approximately 1/18th of a second.
Hops
Enter the number of routers (hops) that the packet must
pass through before reaching the network number
associated with the IPX network.