Avaya 580 - Manual (Page 460)

14-10 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 14
CLI Commands To assign or modify Key Chain parameters using the CLI, enter the
following commands from router:rip mode:
■
To create the Key Chain:
(configure router:rip)# key chain
■
To set the Key Chain ID:
(configure router:rip)# key
■
To set the Key Name (MD5 Key):
(configure router:rip)# key-string
■
To set the Key Chain’s start time and duration:
(configure router:rip)# accept-lifetime
duration { | infinite}
CLI Example To create a Key Chain called AvayaChain with Key ID 123, Key Name
(MD5 Key) AvayaKey123 that begins on March 10, 2002 at 5:30 a.m. and
lasts indefinitely, enter the commands in the following order:
1. key chain AvayaChain
2. key 123
3. key-string AvayaKey123
4. accept-lifetime 05:30:00 10 march 2002 duration infinite
Key Accept
Time:seconds The second(0 - 59) this key becomes valid
Key Accept Year The year (2000 - 2009) this key becomes valid
Key Accept Month The month (1 - 12) this key becomes valid
Key Accept Day The day (1 - 31) this key becomes valid. If you enter a
day that does not exist in a month such as the 31st of
February, the Key will not be created.
Key Accept Duration The duration in seconds that this key is valid. Enter -1
if the key is to last indefinitely.
Table 14-3. Key Chain Parameters
Parameter Defines the...
2 of 2