Avaya 580 - Manual (Page 558)

19-14 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 19
Figure 19-11. AppleTalk Static Route
2. Select the AppleTalk static route that you want to delete from the Select
column.
3. Click DELETE to remove the AppleTalk static route.
CLI Command To delete an AppleTalk static route using the CLI, enter the following
command in Configure mode:
(config-if:)# no appletalk static
Creating an AppleTalk Name-Binding Protocol (NBP) Filter
The NBP performs a conversion from named AppleTalk entities to their
AppleTalk protocol addresses. Multiple names can exist for the same entity
(alias). NBP also performs:
■
Name registration
■
Name deletion
■
Name lookup
■
Name confirmation
NBP allows you to bind a name to the internal storage address for your
entity and register this mapping so that other entities can look it up. You can
display NBP names to users and use addresses internally to locate entities.
When you register your entity’s name and address pair, NBP validates its
uniqueness.
An NBP Filter prevents hosts on one or more interfaces from accessing
hosts or services beyond that interface.
You can create an NBP Filter using either the Web Agent or the CLI.