Avaya 580 - Manual (Page 506)

16-12 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 16
CLI Command To delete an IPX static route using the CLI, enter the following command
from Configure mode:
(configure)# clear ipx route { default | *}
Modifying IPX Static Routes
You can modify IPX static routes form either the Web Agent or the CLI.
Web Agent
Procedure To modify an IPX static route using the Web Agent:
1. In the navigation pane, expand the Routing > IPX > Configuration
folders, and then click Static Routes.
The IPX Static Routes Web page is displayed in the content pane. See
Figure 16-7 .
2. Select the checkbox for the IPX static route that you want to modify
from the Select column.
3. See Table 16-4 to modify the IPX Static Route configuration.
4. Click APPLY to save your changes, or CANCEL to restore previous
settings.
CLI Command To modify an IPX static route using the CLI, enter the following command
Interface mode:
(config-if:)# ipx route
Creating IPX Static Services
You can create IPX static services using either the Web Agent or the CLI.
Web Agent
Procedure To create IPX static services using the Web Agent:
1. In the navigation pane, expand the Routing > IPX > Configuration
folders, and then click Static Services.
The IPX Static Services Web page is displayed in the content pane. See
Figure 16-9 .