Avaya 580 - Manual (Page 334)

12-6 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 12
Creating and Assigning IP Interfaces to the
VLAN
Web Agent
Procedure After you have set up a VLAN, you must create the IP interface that your
VLAN and your subnet uses to communicate with each other. While
creating the IP interface, you must assign it to the VLAN. The last step is to
enable IP forwarding (Routing) global parameters.
To create a new IP interface and assign it to a VLAN:
1. In the navigation pane, expand the Routing > IP > Configuration
folders, and then click Interfaces. The IP Interfaces Web page is
displayed in the content pane. See
Figure 12-2 .
2. Click CREATE. The Add IP Interface Web page is displayed. See
Figure 12-3 .