Cli command – Avaya 580 User Manual
Page 103
Document No. 10-300077, Issue 2
3-9
Configuring System Information
CLI Command
To set recurring Summer Time Hours using the CLI, enter the following
command from Configure mode:
(configure)#
clock summer-time recurring
Day
Select the day of the week when you want recurring
Summer Time Hours to start or end. Options are based on
a seven-day week and include:
• Sunday - the default Start and End values. In the
Western hemisphere, DST starts on the first Sunday
in April and ends on the last Sunday in October.
• Monday
• Tuesday
• Wednesday
• Thursday
• Friday
• Saturday
Month
Select the month when recurring Summer Time Hours
start or end. The twelve months of the Gregorian calendar
are provided.
For recurring Summer Time Hours, the default Start value
is April, the month during which DST starts in the
Western hemisphere. The default End value is October,
the month during which DST ends in the Western
hemisphere.
Hour
Enter a value to represent the hour when Summer Time
Hours start or end for Recurring settings.
For Recurring Summer Time Hours, the default value is
02, meaning 2:00 a.m., for both Start and End hours.
Minutes
Enter a value to represent the number of minutes into the
hour when Summer Time Hours start or end for Recurring
Summer Time Hours. The default value is 00 for both
Start and End minutes.
Table 3-1. Recurring Summer Time Hours Parameters
Parameter
Definition
2 of 2