Avaya 580 - Manual (Page 717)

Document No. 10-300077, Issue 2 25-43
80-Series QoS
Displaying the Queue-Service Settings
CLI Command Use the show port queue service command to display the settings for
queue servicing. The syntax for this command is:
> show port queue service { | } [...,
{ | }]
Example To display the queue service settings for port 1 on the module in slot 3,
enter:
show port queue service 3/1
Table 25-24. Keywords, Arguments, and Options
Keyword, Argument or
Option Definition
The slot number of a module. If you specify
, the switch displays queue-
service settings for all ports on the module in
the slot that you specify.
The slot number of a module, and, either a
port number, or a range of port numbers
having the format Px-Py. For example:
• To specify port 1 on the module in slot
3, enter 3/1.
• To specify ports 1 through 5 on the
module in slot 3, enter 3/1-5.
If you specify , the
switch displays the queue-service settings for
the port or range of ports that you specify.