Removing a user from a group, Viewing configured users, Deleting a user – Avaya 580 User Manual
Page 159
Document No. 10-300077, Issue 2
5-17
Configuring SNMP
Removing a User from a Group
To remove an SNMPv3 user from a group, use the following CLI
command:
(configure)#
no snmp-server user
Viewing Configured Users
To view the currently configured SNMPv3 users, use the following CLI
command:
#
show snmp user [
This command displays the following information:
■
User name
■
Group to which the user belongs
■
Authentication protocol that is used for the authentication and
encryption passwords:
MD5
,
SHA
, or
None
if authentication is not
enabled.
■
Localized authentication key of the user if authentication is enabled.
For information on localized keys, see “
.”
■
State of encryption,
Yes
if enabled, or
No
if disabled.
■
Localized encryption key of the user if encryption is enabled. For
information on localized keys, see “
.”
Deleting a User
To delete an SNMPv3 user, use the following CLI command:
(configure)#
no snmp-server user